Sikagard®-62
Product information
Sikagard®-62 is a 2-pack solvent-free high build coating material based on epoxy resin.
Sikagard®-62 is used:
– As an abrasion-resistant universal coating material designed for normal to moderately aggressive chemical environments. Sikagard®-62 is suitable for use on concrete, stone, cementitious mortars and renderings (not polymer modified), epoxy cements (EpoCem), epoxy mortars, iron and steel.
– For linings in storage tanks and silos, bund areas. As anti-corrosion coating in food-processing plants, sewage works, farms and agricultural enterprises, chemical and pharmaceutical plants, beverage industries and bottling plants.
Green Features
- Sikagard®-62 has been tested and evaluated as per SCAQMD Method 304 to calculate the VOC content. The VOC content is less than 100 g/l (less water).
Compliance & Certifications
- Sikagard®-62 conforms on the LEED v2009 IEQc 4.2 Low Emitting Materials – Paints and Coatings where it falls under the product category “Floor Coatings ” (VOC content requirement: < 100 g/l less water).
APPLICABLE LOTUS CREDITS
| NR / MFR | H-3 |
| BIO | Man-8 |
| Homes | H-3 |
| SB | H-4 |
CONTACT INFORMATION
Sika Limited (Vietnam)
| Add | Nhon Trach 1 Industrial Zone, Nhon Trach Dist., Dong Nai Province |
| Tel | (84-61) 3560 700 |
| Fax | (84-61) 3560 699 |
| [email protected] | |
| Website | http://www.sika.com.vn |
The content of this Product Data Sheet has been compiled from information supplied by the company and/or their agents and is not necessarily endorsed by the Vietnam Green Building Council.
Whilst every care has been taken in preparing this Product Data Sheet, the Vietnam Green Building Council cannot accept responsibility for any inaccuracies or for consequential loss incurred as as result of such inaccuracies arising through the use of the document.